ISO 11357
Differential scanning calorimetry (DSC) Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT).
| ISO 13259
Thermoplastics piping systems for underground non-pressure applications — Test method for leaktightness of elastomeric sealing ring type joints.
|
ISO 19893
Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (equivalent to EN 12 293).
| ISO 527
International test standard for determining the tensile properties of plastics. It includes several parts, with ISO 527-1 covering general principles and others specifying test conditions for different plastic types. The standard is used to assess plastic materials' tensile strength, modulus, and elongation.
|
ISO 10508
Plastics piping systems for hot and cold water installations - Guidance for classification and design.
| ISO 306
Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST).
|
ISO 15874
Plastics piping systems – Thermoplastics pipes and fittings for hot and cold water – Test method for the resistance of mounted assemblies to temperature cycling (equivalent to ISO 19893).
| ISO 180
Determinaton of Izod impact strength. For conducting resilience tests on rigid plastic materials in order to determine their impact fragility characteristics under standard stress conditions.
|
ISO 13477
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test).
| ISO 179
Determination of Charpy impact strength. For conducting resilience tests on rigid plastic materials in order to determine their impact fragility characteristics under standard stress conditions.
|
ISO 9969
Thermoplastics pipes - Determination of ring stiffness.
| ISO 75
Plastics - Determination of temperature of deflection under load.
|
ISO 9967
Thermoplastics pipes - Determination of creep ratio.
| ISO 2506
Superseeded by ISO 2505:2023. Polyethylene pipes (PE) - Longitudinal reversion - Test methods and specification.
|
ISO 9852
Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT). | ISO 2505
International standard that specifies the test method for determining the longitudinal reversion of thermoplastics pipes when exposed to heat. |
ISO 6964
Polyolefin pipes and fittings; Determination of carbon black content by calcination and pyrolysis; Test method and basic specification.
| ISO 1167
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure Part 1: General method, Part 2: Preparation of pipe test pieces, Part 3: Preparation of components, Part 4: Preparation of assemblies.
|
ISO 9854
Determination of Charpy impact strength on thermplastic pipes.
| ISO 13479
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (notch test).
|
ISO 60
Plastics - Determination of apparent density of material that can be poured from a specified funnel.
| ISO 13953
Polyethylene(PE) pipes and fittings - Determination of the tensile strength and failure mode of test pieces from a butt-fused joint.
|
ISO 3127
Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method.
| ISO 9080
ISO 9080 pipe testing is a long-term hydrostatic pressure testing method that uses statistical extrapolation to determine the expected 50‑year strength and reliability of thermoplastic pipes.
|
ISO 2507
ISO 2507 defines how to determine the Vicat softening temperature (VST) of thermoplastic pipes and fittings.
| ISO 11173
Specifies a method for determining the resistance to external blows of thermoplastic pipes of circular cross-section, called the staircase method.
|
ISO 6259
Thermoplastics pipes - Determination of tensile properties.
| ISO 13259
Thermoplastics piping systems for underground non-pressure applications — Test method for leaktightness of elastomeric sealing ring type joints.
|
ISO 1133
Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics. | |
