 |
| Quantity: | |
|---|---|
Melt Flow Indexer GT-MFI-450BStandards
ISO 1133
ASTM D 1238
Application
It is a new and affordable tabletop instrument that tests the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of a wide range of thermoplastic raw materials, in the form of granules, strips of film etc, which is particularly useful for quality control tests on thermoplastics.
Features
The instrument is with panel for a simple and fast input of the test parameters, visualization of test execution and final results. Also, test result can be print out via a built-in printer.
Both Melt flow rate (MFR) and Melt volume rate (MVR) can be determined through a calibrated die under the effect of a pre-determined force, at constant temperature.
Piston displacement monitored by encoder; storing and printing whenever necessary.
It is supplied completely with all the accessories and weights necessary for maintenance and operation.
Technical Parameters
Temperature Control Range: 50°C - 450°C
Temperature Accuracy: +/- 0.5°C
Temperature fluctuation ± 0.5°C
Temperature display error ≤±0.2°C
Temperature Recovery time:< 4min
Displacement Accuracy: ± 0.02mm
Measurement range : 1.0g -100g/10 Min (MFR) / 0.01 -350cm3/10min(MVR)
Electrical Requirement: 220V 50HZ/60HZ
Melt Flow Indexer GT-MFI-450BStandards
ISO 1133
ASTM D 1238
Application
It is a new and affordable tabletop instrument that tests the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of a wide range of thermoplastic raw materials, in the form of granules, strips of film etc, which is particularly useful for quality control tests on thermoplastics.
Features
The instrument is with panel for a simple and fast input of the test parameters, visualization of test execution and final results. Also, test result can be print out via a built-in printer.
Both Melt flow rate (MFR) and Melt volume rate (MVR) can be determined through a calibrated die under the effect of a pre-determined force, at constant temperature.
Piston displacement monitored by encoder; storing and printing whenever necessary.
It is supplied completely with all the accessories and weights necessary for maintenance and operation.
Technical Parameters
Temperature Control Range: 50°C - 450°C
Temperature Accuracy: +/- 0.5°C
Temperature fluctuation ± 0.5°C
Temperature display error ≤±0.2°C
Temperature Recovery time:< 4min
Displacement Accuracy: ± 0.02mm
Measurement range : 1.0g -100g/10 Min (MFR) / 0.01 -350cm3/10min(MVR)
Electrical Requirement: 220V 50HZ/60HZ
