Golden Time Technology Development Limited

CALL US

+86 13831458899

+86 314 5569168

Solutions

Home / Product / Polymer Compound Testing / Melt Flow Indexer / Digital Display Extrusion Plastometer for Laboratory With CE

Digital Display Extrusion Plastometer for Laboratory With CE

The extrusion plastometer is used to determine MI value, there are two test methods: MFR and MVR. 
LCD screen shows all the necessory test parameters, the cut-off knife works automatically. 
Double-temperature measuring points largely increase the temperature accuracy. 
Availability:
  • GT-MFI-MVRD
  • GT-TEST
  • 9024800000

Product Description

Melt Flow Indexer GT-MFI-450D

Standards

In terms of melting flow rate, the tester compares favorably with international standards like ISO1133, ASTM D1238 and GB/T 3682 method A and B.


Application

The melt flow indexer  is an affordable tabletop instrument that tests the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of a wide range of thermoplastic raw materials.


This test method is particularly useful for quality control tests on thermoplastics.


MVR is especially useful when comparing materials with varying filler contents and when comparing filled with unfilled thermoplastics.


The MFR can be determined from MVR measurements provided the melt density at the test temperature and pressure is known.


High Accuracy

The built-in microprocessor maintains temperature control to within ± 0.5℃, with rapid ram-up to the set point. Extruded material is automatically cut off by the built-in scraper mechanism at preset intervals, controllable to ± 0.1second. 


Ease to operate!
The tester is supplied completely with the accessories and weights necessary for maintenance and operation. Nothing else to buy--just plug it in and start a test.


Main Parameters    

  • Temperature: 50 ℃ to 450℃

  • Temperature accuracy: ≤0.2℃

  • Temperature display resolution: 0.1℃

  • Control mode: 7” colorful touch screen and PC   

  • MVR displacement accuracy: 0.02mm

  • Temperature recovery time: <4 min

  • Communication port: RS485 / USB

  • Temperature measuring points: 2

  • Measurement range:(0.1-100)g/10min /(0.01-350)cm³/10min


Features

1.   When MVR test method is used, the MVR value of the sample with a specified time can be determined, and the MFR value can be obtained after weighing the sample. Also, the melt density can be calculated.

2.  The MFI device can be controlled by 7” colorful touch screen, as well as computer via application software.

3.  In addition to parameters setting and constant temperature control, cutting, calibration, timing, displaying MFR and MVR results, and calculating melt density, the application software also features query and export functions.

4.  In order to prevent misoperation, some important operations require password verification.

5.  Temperature voice prompt, and restore time voice prompt. Quick heating rate, low overshoot, high constant temperature accuracy, quick temperature restoration. Upper limit temperature protection, constant temperature voice prompt, recover time voice prompt.


Standard configuration

1. Piston Rod             

2. Die                    

3. Die Cleaning Tool      

4. Cut-off Knife            

5. Cylinder Cleaning Tool           

6. Sample Charging Tool             

7. Lever Meter            

8. Funnel

9. Cylinder               

10. Weights (up to 21.6kg)   

low cost melt mass flow plastometer suppliers

OUR SERVICE

We have 20-year expericen design team

We have professional QC team to ensure product quality

We have skilled staff to provide you perfect finished products

We provide you ontime aftersale service


Previous: 
Next: 

Quick Links

Solutions

Contact Us

      jjtest@polymer-test.com
     + 86-0314 5569168
    Floor Fulite Building, Huangsi Street,        Xicheng District, Beijing, China

Send Us A Message

Send us an email and we will provide you with the latest product information
Copyright © 2020 Golden Time Technology Development Limited      Technical support:leadong