Availability: | |
---|---|
GT-MFI-MVR
GT-TEST
9024800000
Product Description
Standards
ISO1133, ASTM D1238 method A & B.
Application
The Melt Flow Indexer is a new and affordable tabletop instrument that measures the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of a wide range of thermoplastic raw materials, such as films, granules, etc.
This test method is particularly useful for quality control tests on thermoplastics. MVR will be found particularly useful when comparing materials of different filler content and when comparing filled with unfilled thermoplastics. The MFR can be determined from MVR measurements provided the melt density at the test temperature and pressure is known.
High Accuracy
The built-in microprocessor maintains temperature control to within ± 0.5℃, with rapid ram-up to the set point. Extruded material is automatically cut off by the built-in scraper mechanism at preset intervals, controllable to ± 0.1second.
Ease to operate!
Testing Melt Flow Rate has never been so economical or easy to do! The tester is supplied completely with the accessories and weights necessary for maintenance and operation. Nothing else to buy--just plug it in and start a test.
Features
1. When MVR test method is used, the MVR value of the sample with a specified time can be determined, and the MFR value can be obtained after weighing the sample. Also, the melt density can be calculated.
2. The MFI device can be controlled by 7” colorful touch screen, as well as computer via application software.
3. The application software has the functions of parameter setting, constant temperature control, cutting, calibration, timing, display of MFR and MVR results, calculation of melt density, and query and export of test data.
4. Fast heating rate, small overshoot, high constant temperature accuracy, quickly restore the constant test temperature. With upper limit temperature protection, constant temperature voice prompt, restore time voice prompt.
Technical Parameters
Operating temperature: 50 ℃ to 450℃
Temperature control accuracy: ≤0.2℃
Temperature display resolution: 0.1℃
Control mode: 7” colorful touch screen and PC
MVR displacement accuracy: 0.02mm
Temperature recovery time: <4 min
Communication port: RS485 / USB
Temperature measuring points: 2
Measurement range:(0.1-100)g/10min /(0.01-350)cm³/10min
Standard configuration
1. Piston Rod
2. Die
3. Die Cleaning Tool
4. Cut-off Knife
5. Cylinder Cleaning Tool
6. Sample Charging Tool
7. Lever Meter
8. Funnel
9. Cylinder
10. Weights (up to 21.6kg)
OUR SERVICE
We have 20-year expericen design team
We have professional QC team to ensure product quality
We have skilled staff to provide you perfect finished products
We provide you ontime aftersale service