Golden Time Technology Development Limited

CALL US

+86 13831458899

+86 314 5569168

Products Detail

Home » Products » Solutions for plastics pipes & fittings » Cheap Dichloromethane Resistance Tester with CE for PVC Pipes

Products Detail

Share to:

Cheap Dichloromethane Resistance Tester with CE for PVC Pipes

GTDRT-50 is designed for determining the resistance of unplasticized poly (vinylchloride) (PVC-U) pipes to dichloromethane at a specified temperature.
It is applicable to all PVC-U pipes, irrespective of their intended use.
The method can be used as a rapid means of quality control during manufacturer.
Availability:
Quantity:
  • GT-DMRT
  • GT-TEST
  • 9024800000

Standards

l  ISO 9852-2007   

 

Application

IT is designed for determining the resistance of unplasticized poly (vinylchloride) (PVC-U) pipes to dichloromethane at a specified temperature.

It is applicable to all PVC-U pipes, irrespective of their intended use.

The method can be used as a rapid means of quality control during manufacturer.

Principle

A piece of PVC-U pipe, of specified length, chamfered at one end to an angle dependent on its thickness, is immersed for 30min in dichloromethane, at a temperature specified by the referring standard, to verify that the PVC-U is not attached at that temperature. For safety reasons, the surface area of the dichloromethane is kept to the minimum and the dichloromethane is covered by a deep layer of water to reduce evaporation. After immersion in the dichloromethane, the test piece is held in the water layer to allow it to “drip” before final drying and inspection.

Feature

1.    The insulation system adapts the inner lining wrapping the whole body, two kinds of insulation materials are used for good insulation performance& long-term energy saving.

2.    During the heating or cooling process, the outer chamber temperature is close to room temperature, which greatly improves the safety of the whole machine, also save more than 70% of power consumption.

3.    The whole material is made of 304 stainless steel.

4.    Built-in heater largely improves the high heat exchange efficiency.

5.    The refrigeration device is placed outside, which has no influence on the temperature of the laboratory.

6.   The chamber lid lid is controlled by the gas spring, making operation more reliable and convenient. The lid is sealed with silicone rubber strip, no air overflow even at high temperature.

7.    Structural frame bottom of the box, bearing high weight & deformation resistance.

 

Technical Parameters

1.    Temperature range: 1050 (With cooling and heating devices)  

2.    Temperature uniformity: ±0.5

3.    Temperature resolution: 0.1

4.    Test medium: pure water

5.    Test bath dimension: φ350mm x 260mm

6.    Overall dimension: 660×660×800(mm)

7.    Power supply: 220VAC50Hz3kW

Associated equipment

Ventilation Chamber   



OUR SERVICE

We have 20-year expericen design team

We have professional QC team to ensure product quality

We have skilled staff to provide you perfect finished products

We provide you ontime aftersale service


FAQ

Q: How to get an operative offer?

A: Please sent us your technical requirement in detail, e.g. the test standards, the material of test piece. Then you will get the quotation within 24hours.


Quick Links

Solutions

Contact Us

      jjtest@polymer-test.com
     + 86-0314 5569168
    Floor Fulite Building, Huangsi Street,        Xicheng District, Beijing, China

Send Us A Message

Send us an email and we will provide you with the latest product information

Copyright © 2020 Golden Time Technology Development Limited      Technical support:leadong